Citation Porter
- 12 oz. 60°L crystal malt
- 8 oz. chocolate malt
- 8 oz. roasted barley
- 3 lbs. amber dry malt extract
- 3 lbs. light dry malt extract
- 1 oz. Northern Brewer pellet hops (9.9% alpha acid, __ beta acid)
- 0.5 oz. Cascade whole hops (estimated 5.5% alpha acid)
- 1 tsp. Irish moss
- 0.5 oz. Cascade whole hops (estimated 5.5% alpha acid)
- 1 vial White Labs London Ale Yeast #WLP013 (35 mL)
Directions
- Steep crystal malt, chocolate malt, and roasted barley in 5 quarts of water at 154° for 45 minutes. Sparge with 2 quarts water. This is a smaller steeping volume than I normally do, but I saw a recommendation indicating that this would reduce tannin leaching (i.e., use a maximum of 3 quarts water per pound of grains). Based on the taste of the final wort, I am inclined to agree.
- Top up brew pot to 4 gallons, bring to a boil and add dry malt extract.
- Once wort is boiling, add Northern Brewer hops.
- At the 30 minute mark (post-boil), add 0.5 oz. Cascade whole hops.
- At the 50 minute mark, add 1 tsp. Irish moss
- At the 60 minute mark, turn off the heat and add the final 0.5 oz. of Cascade whole hops
- Coil, transfer into primary fermenter (leaving behind most of the trub), (3 gallons into primary) and top up to 5 gallons.
- Starting gravity was 1.053 at 74°, corrected to 1.054 at 60°. This is spot-on with what Beer Smith 2 calculated for the recipe.
- Starting temperature, when I pitched the yeast, was 74°.
The wort is quite delicious, suggesting a nice final product is around the corner.
No comments:
Post a Comment